Specification
Dronetag BS transmits position and identification data adhering to Direct (Broadcast) Remote ID regulations. Its transmission follows the standards outlined in prEN 4709-002 for the EU and ASTM F3411 for the US. Dronetag BS is officially recognized as a Remote ID solution on the EASA website and has been approved by the FAA as one of the initial Remote ID modules. You can verify the Declaration of Compliance here
| Parameter | Value |
|---|---|
| Remote ID types | Direct (EU) / Broadcast (US) |
| Remote ID technology | Bluetooth 4.0 Legacy + 5.0 Long Range |
| Short-range radio | Bluetooth 2.4GHz |
| Bluetooth output power | 8dbm |
| Average current consumption | 15 mA |
| Maximum current consumption | 50 mA |
| Mounting mechanism | Adhesive or velcro |
| Operating temperature | -40°C to +85°C (-40°F to 185°F) |
| Dimensions | 18 x 14 x 5 mm (0.71 x 0.55 x 0.19 in) |
| Weight /w heat shrink + wire antennas | 1.5 grams (0.05 oz) |
| Weight /w enclosure + wire antennas | 3 grams (0.1 oz) |
| Supported baud rates | Standard ones - configurable in Dronetag app |
| Input voltage | 3.3 – 17V |
| Input voltage regulator | Low-noise buck converter |
| Remote ID Standards | ASD-STAN EN 4709-002 & ASTM F3411-22 |
| Certifications | Uses FCC/CE approved radio module |
| Indicators | RGB LED to show the state |