Specification
Dronetag Mini transmits position and identification data adhering to Direct (Broadcast) and Network Remote ID regulations. Its transmission follows the standards outlined in prEN 4709-002 for the EU and ASTM F3411 for the US. Dronetag Mini is officially recognized as a Remote ID solution on the EASA website
| Parameter | Value |
|---|---|
| Cellular | LTE CAT-1 |
| Cellular bands | 3, 8, 20 for the EU and 2, 4, 12 for the US |
| Cellular frequencies | 698-960 MHz, 1710-2170 MHz |
| Short-range radio | Bluetooth 2.4 GHz |
| Bluetooth output power | 8dbm |
| Sensors | GNSS, barometer, accelerometer |
| Positioning | GPS L1, GLONASS L1, Galileo E1, SBAS |
| SIM card | Integrated SIM chip on the mainboard |
| Built-in antennas | Internal LTE, Bluetooth and GNSS |
| Optional antennas | External LTE and Bluetooth via MMCX plugs |
| External ports | 3.3V logic extension connector and 5V via USB-C |
| Battery | Li-Po 3.7V 600 mAh |
| Battery life | 8-14 hours (depending on the configuration) |
| Charging | 5V USB-C |
| Charging time | 3 hours from a discharged state |
| Average current consumption | 50 mA |
| Maximum current consumption | 1 A |
| Enclosure | plastic |
| Fastening mechanism | 3M Dual-lock SJ4570 |
| IP rating | IP43 |
| Operating temperature | -20°C to +60°C (-4°F to 140°F) |
| Dimensions | 57.5 x 35 x 16 mm (2.26 x 1.37 x 0.63 in) |
| Weight | 36 grams (1.27 oz) |