Specification
Dronetag Mini 4G transmits position and identification data adhering to Direct (Broadcast) and Network Remote ID regulations. Its transmission follows the standards outlined in prEN 4709-002 for the EU and ASTM F3411 for the US. Dronetag Mini is officially recognized as a Remote ID solution on the EASA website
| Parameter | Value |
|---|---|
| Cellular | LTE CAT-1 bis |
| Frequency range | (703* external antenna only, band 28) 791-960 MHz, 1710-2170 MHz, 2500-2690 MHz |
| Cellular bands | LTE-FDD: 1, 3, 5, 7, 8, 20, 28* |
| Cellular transmitting power | Power Class 3 |
| Bluetooth (phone connection) | Bluetooth 4, Bluetooth 5 |
| Bluetooth output power | 8 dbm |
| Sensors | GNSS, barometer, accelerometer |
| Positioning | GPS L1, GLONASS L1, Galileo E1, BeiDou B1C, SBAS, QZSS |
| SIM card | Integrated SIM chip on the mainboard and slot for nano SIM |
| Built-in antennas | Internal LTE, Bluetooth and GNSS |
| Optional antennas | External LTE and Bluetooth via MMCX jacks |
| Battery | Li-Po 3.7 V 600 mAh |
| Battery life | 8-14 hours (depending on the configuration) |
| Charging | 5 V USB-C |
| Charging time | 3 hours from a discharged state |
| Enclosure | SLA resin 3D printed |
| Fastening mechanism | 3M Dual-lock SJ4570 |
| IP rating | IP43 |
| Operating temperature | -20°C to +60°C (-4°F to 140°F) |
| Dimensions | 57.5 x 35 x 16 mm (2.26 x 1.37 x 0.63 in) |
| Weight | 36 grams (1.27 oz) |