Skip to main content

Configuration

The Beacon is a highly customizable piece of hardware to suit your flight's needs. It allows you to configure various device parameters, which will help you optimize the performance and battery usage. Configuration is manageable in the Mobile app via Bluetooth. Do not change the parameters while the drone is in-flight because you might get into an inconsistent state.

General​

  • Flight auto-start is an option (enabled by default) that automatically initiates the flight when the device is ready for the flight (has G fix and DRI is set). If you disable this option, a short button press in Flight Ready state is needed to start the flight manually.

  • MAVlink & DJI A3 integration that takes care of starting/ending your flight based on the data sent on MAVlink protocol when USB-C port is connected to MAVlink flight controller. This is an option for Enterprise customers only and needs to be mutually discussed to ensure the planned functionality, please contact us at sales@dronetag.com before ordering.

  • Button flight control is an option (enabled by default) that controls whether Dronetag Beacon button can be used for starting/ending the flight. Disable this option only if you think the button can be accidentally pressed by something inside the drone while it is in flight.

  • USB Mode (disabled by default) ensures that the Beacon operates in tandem with the drone's activation. It's crucial to enable this mode only when planning to connect the Beacon directly to your drone and utilize the drone's power source to operate it. Activating USB Mode may affect the Beacon's ability to undergo firmware updates while not connected to USB.

πŸ†” Entering Your Operator ID in the Dronetag App​

Before you fly with your Dronetag device, you need to enter your Operator ID in the app. This ensures full compliance with Remote ID / UAS identification regulations in your region.
We support different formats and rules depending on the region you operate in: EU & Singapore, Japan, USA.

What is an Operator ID?

An Operator ID is a unique identifier issued to you (or your organisation) by your national aviation authority when you register as a drone operator.

  • It identifies the operator, not just one drone.
  • It must be displayed on each drone you operate and in many cases broadcast via Remote ID systems.
  • You will enter this ID into the Dronetag app so that your device broadcasts the correct identifier.
  • Where to get it? You register with your national authority (e.g., in the EU via your country’s CAA, in Japan via MLIT, in USA via FAA).
    • EU: Register with your national CAA β†’ receive your Operator ID.
      oaicite:0
    • Japan: Register on the MLIT drone portal.
      oaicite:1
    • USA: Register via FAA DroneZone.
      oaicite:2
note

The format of the ID and whether you need to enter it depends on your region. Follow the section below for your specific region.

EU & Singapore

Format​

  • EU: Your Operator ID consists of two parts: a public part (16 alphanumeric characters) and a private/suffix part (often 3 characters) which you do not normally affix to your drone.
    • Example public part: CZEabc123def456
    • Private suffix: e.g. -xyz (used internally, not for display)
  • Singapore: Similar format (12-digit Operator ID issued via UA Portal) effective from 1 Dec 2025.

How to Enter into Dronetag App​

  1. Open the Dronetag app.
  2. Go to Profile β†’ My Devices β†’ [Choose Your Device] β†’ Remote ID set-up.
  3. Enter your 16-character public part (e.g., CZEabc123def456).
  4. Do not enter the private suffix (e.g., -xyz) unless instructed.
  5. Your Operator ID will be uploaded to the device and broadcast.

Where to Get the ID​

  • Register with the national aviation authority in your country (for EU resident) or via the UA Portal (for Singapore).
  • Ensure the ID is visible on every drone you own.
Japan

Format​

  • A 15-character operator registration number issued by the Ministry of Land, Infrastructure, Transport and Tourism (MLIT) via the national UAS portal.

How to Enter into Dronetag App​

  1. Open the Dronetag app.
  2. Go to Profile β†’ My Devices β†’ [Your Device] β†’ Operator ID.
  3. Enter the full 15-character code as given by MLIT.
  4. Your Operator ID will be uploaded to the device and broadcast.

Where to Get the ID​

  • Register your drone/operator via Japan’s UAS registration portal.
USA

Format​

  • In the USA, you register as an operator with the Federal Aviation Administration (FAA) and receive a registration number. However β€” you typically do not need to separately enter an Operator ID in the Dronetag app for Remote ID purposes, since standard Remote ID drones broadcast the required info and the operator number is linked via the DroneZone system.

What to Do in the Dronetag App​

  • Since no extra Operator ID entry is required, simply ensure your drone is correctly registered with the FAA and that your device is Remote ID compliant.

Where to Get the ID​

  • Register via FAA DroneZone and obtain your operator registration number. Ensure your drone meets Remote ID rules.
βœ… Final Checks
  • After entering your Operator ID, power on your device, go to the device details in the app, and check that the Operator ID is synchronised.
  • Make sure that the ID you entered exactly matches the one issued by the authority (uppercase/lowercase, hyphens, etc.).
  • Confirm the ID is visible on your drone (as required in your region).
  • For the EU: Only the public part of the Operator ID is broadcast; keep the suffix/private part secure and do not share it.
  • If unsure, check with your national aviation authority or your Dronetag supplier.

Direct Remote ID​

  • Static data frequency configures the frequency of the DRI messages containing takeoff location, UAS Operator ID, and Aircraft ID.
  • Dynamic data frequency configures the frequency of the DRI messages with telemetry data.

Sensors​

  • GNSS input configures which GNSS receiver is used as an input for sending the DRI. Possible options are Internal for Dronetag Beacon receiver, MAVlink for reading the data from MAVlink flight controller through EXT port, and Simulated for artificial simulated data for debugging/troubleshooting/testing purpose. Simulated must not be used for general usage.
  • Internal GNSS mode configures the mode of internal GNSS receiver. The Full power mode has about five times higher power consumption than the Power-saving mode. Therefore, it is recommended to use Full power mode only in challenging conditions where problems with GNSS fix occur.
  • Location update rate configures the update and navigation rate of the GNSS receiver in Hz. A higher value means more up-to-date data for DRI but consumes more power. Thus 1 Hz is recommended for general use.

Visibility on the Dronetag App Map​

Following setup has to be performed if you want to see the Beacon on the Dronetag app map:

  1. Turn the Beacon on and go to Dronetag app.

  2. Go to Profile > Preferences > Bluetooth features > Receive Direct Remote ID data > ON.

  3. Go to the home screen > tap on the Customisation button at bottom right corner > check the Display Phone DRI traffic.