Dronetag Beacon (gen.1) Specification
Beacon transmits position and identification data locally, adhering to Direct (Broadcast) Remote ID regulations. Its transmission follows the standards outlined in prEN 4709-002 for the EU and ASTM F3411 for the US. Dronetag Beacon is officially recognized as a Remote ID solution on the EASA website and has been approved by the FAA as one of the initial Remote ID modules. You can verify the Declaration of Compliance here
| Parameter | Value |
|---|---|
| Short-range radio | Bluetooth 2.4 GHz |
| Sensors | GNSS, barometer, accelerometer |
| Positioning | GPS L1, GLONASS L1, Galileo E1, SBAS |
| Built-in antennas | Bluetooth and GNSS |
| Bluetooth output power | 8dbm |
| External ports | Via USB-C |
| Battery | Li-Po 3.7V 200 mAh |
| Battery life | 10-18 hours (depending on the configuration) |
| Charging | 5V USB-C |
| Charging time | 2 hours from a discharged state |
| Average current consumption | 15mA |
| Maximum current consumption | 100mA |
| Enclosure | plastic |
| Fastening mechanism | 3M Dual-lock SJ4570 |
| IP rating | IP43 |
| Operating temperature | -20°C to +60°C (-4°F to 140°F) |
| Dimensions | 37 x 26 x 16 mm (1.4 x 1.02 x 0.6 in) |
| Weight | 17 grams (0.59 oz) |