Skip to main content

Attaching to the Drone

The BS can be attached to the drone in multiple ways, depending on your decision regarding the enclosure. Please check the section BS options.

If you use BS without an enclosure, you can attach it using an M2 screw mounting hole or double-sided adhesive tape or velcro.

If you decide to use BS with an enclosure, you can attach it using double-sided adhesive tape or velcro, no M2 holes are possible with the enclosure.

*When using velcro, we advise using a 3M Dual Lock with interlocking mushroom-shaped heads. They slide past each other to close with a snap and peel apart easily when you need to separate them by simply pulling the strips by hand.

Proper Location and attachement advice​

Please watch out for these potential issues when looking for a suitable location and the type of attachment of the BS:

  • If you are using a double-sided tape, please follow the manufacturer's recommendation, as some require some time curing for proper attachment.
  • If mounted by double-sided tape, don't place BS over a curved surface because it might come off during flight.
  • If mounted by double-sided tape, don't place BS on a soft material that can bend during mating (such as plastic covers). The double-sided tape may not hold properly.
  • It is recommended to place BS in accessible locations. You should have the LEDs visible.
  • When using an external antenna please do not choose a location with any metal surfaces and carbon tubing to prevent antenna detuning.

Disclaimer​

We kindly advise that our company cannot assume responsibility for the installation of our product by the user or any potential loss incurred as a result. While we strive to provide comprehensive guidance and support, the responsibility for proper installation lies with the user. Should you require any further assistance or clarification, please do not hesitate to contact our customer support team. Your understanding is greatly appreciated.