Přeskočit na hlavní obsah

🚀 Deployment Step-by-Step Guide

This guide walks you through the full process of deploying your Dronetag Scout device—from unboxing to live drone detection in the field. Each step includes helpful links to relevant documentation, so you can get started quickly and confidently.

1. Unpack Your Scout Device​

Begin by unboxing your Dronetag Scout and verifying that all components are present. Before physical deployment, connect the device to your local network to verify functionality.

2. Connect the PoE Injector to Power​

Use the Power over Ethernet (PoE) injector included with your Scout. If you choose to use your own injector:

caution

Ensure that the injector matches the voltage and power specifications of the official Dronetag PoE injector to avoid damage.

🔌 Connecting to the Scout

3. Plug in the Ethernet Cable and Connect to the Scout​

Connect the Ethernet cable between the Scout and your network via the PoE injector. To access the management interface, you’ll need the device’s local IP address.

🔍 Find out how to locate the IP address

4. Access the Management Page​

Open the Scout’s Management Page in your browser (e.g., https://[Scout-IP]).
Here, you can view diagnostics, network info, and configure operational parameters.

📘 Learn how to configure the network correctly

5. Configure Cloud Mode​

To use your Scout with Dronetag Cloud and the Dronetag App, follow these steps:

5.1 🧑‍💻 Create a Dronetag Account & Register the Device​

  1. Go to dronetag.app or Download the dronetag app
  2. Sign up or log in.
  3. Add your Scout device using its serial number.

📘 Full guide to Cloud Mode & registration

6. Verify Functionality​

Before final deployment, confirm the Scout is working properly.

6.1 🛰️ Sensor Mode Test (Local Map)​

Even in cloud mode you still can access the Sensor mode features, check detection of Remote ID drones directly via the Scout’s internal map interface: 🌐 http://<SCOUT_IP>/map. You can find further details about the map here.

📘 Sensor Mode basics

6.2 ☁️ Cloud Mode Test (App)​

If you’re using Cloud Mode, test the connection and detection using the Dronetag App:

  1. Open dronetag.app (web or mobile)
  2. Log in to your account
  3. Navigate to your device
  4. Confirm:
    • The Scout shows as online
    • Live telemetry is updating
    • Remote ID drones are visible if nearby

📘 Using the Dronetag App

7. Choose an Optimal Installation Location​

Select a location that ensures minimal signal interference and maximum visibility to the sky.

📍 Best practices for site selection

8. Mount the Scout Securely​

Physically install the Scout in your chosen location.
Use the mounting hardware provided or your own reliable outdoor mounting solution.

🔧 Follow the mounting instructions

9. Start Scanning for Drones!​

You're now ready to begin real-time detection of Remote ID signals.
Head over to the Dronetag App to monitor live activity from your Scout device.

💡 Need Help?

If you encounter issues at any step, consult our Troubleshooting Guide for solutions to common problems, or contact support for direct assistance.