Skip to main content

Quick Start

1. Set-up the On-Premise Node​

  1. Connect the power source and ethernet cable to the I/O ports situated rear
  2. Press the power button on the front
  3. Verify that the power LED is lit
note

If your network does not provide DHCP capability, you will need to use static IP configuration on your On-Premise Node. For more information, refer to the Advanced Configuration section.

After few minutes, the web services should be running and you should be able to verify the functionality. Please allow the system few minutes to boot up and start the services (up to 5 minutes).

2. Verify On-Premise Node is working​

Check the label on the node with the hostname. If your client and your local network supports mDNS, open your browser and enter the following address:

http://dt-onprem-<ID>.local

Where <id> is the number on the label on your node. You should see the Dronetag App running in your browser.

Next steps​

Continue with the other guides on how to configure your Dronetag equipment to start sending data to your on-premise instance, and how to use the apps to access the visualization and data.