Choosing Location for Scout
What is the Right Location
To get the most out of your Scout, location matters - a lot.
- Choose a suitable and elevated spot for installation.
- The receiver’s performance relies heavily on a clear, unobstructed view of its surroundings.
- A rooftop, ideally the highest one in the area, often proves to be the perfect vantage point for maximum signal coverage.
📡 For optimal range and accuracy, avoid mounting the Scout too close to any devices that transmit on 2.4 GHz or 5 GHz frequencies - such as Wi-Fi routers or other radio systems.
Factors Influencing Remote ID Signal Reception
Signal reception isn’t just about hardware - it’s also about the environment. Several key factors can impact how well the Scout picks up Remote ID transmissions.
Ensuring Visual Line of Sight (VLOS)
• Physical obstacles between the drone and the Scout - like buildings, trees, or terrain - can block or weaken signals.
• When possible, install the Scout in a spot with a clear view in the direction where drone activity is expected.
Signals in the 2.4 GHz and 5 GHz Frequency Bands
• The Scout operates in frequency bands that are commonly shared with other technologies.
• Devices such as Wi-Fi routers, Bluetooth speakers, or even smart home hubs can cause interference.
• Keep the Scout as far away as possible from these types of devices.
Electromagnetic Noise
• All electronics generate a certain amount of background noise, which can interfere with sensitive receivers like the Scout.
• Avoid installing the Scout near AC units, inverters, solar power stations, or other large electrical systems.
Transmission Power of the Drone’s Remote ID Signal
• Not all drones are created equal - the power of the signal they transmit can vary greatly.
• This power level is defined by the drone manufacturer and local regulations, and while you can't control it, it's good to be aware that some drones may simply broadcast farther than others.